Mastercam 2021 build 23.0.18934.0 Download + Activation / Patch

Mastercam 2021 build 23.0.18934.0 Download

Mastercam 2021 build 23.0.18934.0 Download

Introduction

Mastercam provides CAD / CAM tools for all kinds of programming, from simple to highly complex. The system has everything you need for your production – milling from two to five axes, turning, turning and milling, wire EDM, woodworking, art modeling and complex 3D engraving. Mastercam Design allows you to import data from all known CAD systems, as well as design free spatial 3D-shapes using all the necessary tools for this, including wireframe and surface modeling, solid modeling, free hybrid modeling, drafting and automatic sketching and drawing. The choice of one Mastercam module or another depends on what tasks it is supposed to be used for.

System Requirements

  • OS
    Windows 7, 8.1 or 10 64-bit Professional Windows 10
    Windows 10 64-bit Professional
  • Processor:
    Intel® or AMD 64-bit processor , 2.4 GHz or faster
    Intel i7 or Xeon® E3, 3.2GHz or faster
  • Memory:
    minimum 8 GB, recommended 32 GB
  • Video:
    OpenGL 3.2 and OpenCL 1.2 support with 1 GB memory. No onboard graphics.
    NVIDIA Quadro® or AMD FirePro ™ / Radeon Pro card with 4 GB (or higher) dedicated memory.
    Monitor: 1920 1080 resolution
    1920
    1080 resolution, dual monitors
  • Storage:
    Hard drive with at least 20 GB free USB and / or DVD drive (depending on installation media and licensing method)
    Solid State Drive (SSD) wit

Download

File ParametersParameter Values
File nameMastercam.2021.v23.0.18934.0
File Size1.66GB
File FormatFolder
Download link Mastercam.2021.v23.0.18934.0

Installation Guide

  1. Install 1.Sentinel_LDK_Run-time_setup/HASPUserSetup.exe

  2. Install Mastercam 2021 (2.Setup/mastercam2021-web.exe)

  3. Install update 1 (3.Update 1/mastercam-Update1_PC2.exe)

  4. Do not start Mastercam!

  5. Run REGEDIT, open the registry, and delete HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey (if it exists)

  6. Run MultiKey_18.1.1_x64_24032019_testmode\MasterCAM_TEST_185221_hasp_dealer.reg and confirm to add the information to the Windows registry

  7. Run MultiKey_18.1.1_x64_24032019_testmode\install.cmd as administrator and wait until the installation is complete

  8. Copy Mastercam.Dll to the program installation directory

  9. Restart the computer!

    Mastercam 2021 build 23.0.18934.0 Download

5 5 votes
Article Rating
赞(50) 打赏
未经允许不得转载:iemblog » Mastercam 2021 build 23.0.18934.0 Download + Activation / Patch
Subscribe
Notify of
guest
3 COMMENTS
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Awalthe
Awalthe (@guest_1833)
1 year ago

Is it work 100%?

sumit
sumit (@guest_1927)
11 months ago
Reply to  Awalthe

no

Mohamed Abid
Mohamed Abid (@medmamd)
3 months ago

IS THERE PATCH FRENCH ?

免责声明:本站大部分下载资源收集于网络,只做学习和交流使用,版权归原作者所有,请在下载后24小时之内自觉删除,若作商业用途,请购买正版,由于未及时购买和付费发生的侵权行为,与本站无关。本站发布的内容若侵犯到您的权益,请联系站长删除,我们将及时处理! Disclaimer: Most of the download resources on this site are collected on the Internet, and are only used for learning and communication. The copyright belongs to the original author. Please consciously delete within 24 hours after downloading. If you use it for commercial purposes, please purchase the original version. If the content posted on this site violates your rights, please contact us to delete it, and we will deal with it in time!

联系我们 Contact us

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏

3
0
Would love your thoughts, please comment.x
()
x