Autodesk Revit 2021 Official Download + Active / Activation

Autodesk Revit 2021

Autodesk Revit 2021 Official Download


Autodesk Revit is a building information modeling software used by architects, civil engineers, and installers to model three-dimensional models and draw building details. This software is derived from the roots of revitalization in the sense of revitalizing and creating life and revitalize in the sense of revitalizing and revitalizing life due to the high power of creating work in engineering software. The calculation view also has the ability to manage financially and the cost of production and consumption based on time, which is called 4D BIM. This software has three versions: architecture, civil engineering and facilities.

Key Features

  • Simplicity and speed of learning
  • Increasing the speed and accuracy of drawing and also changing maps
  • Simultaneous 3D and 2D drawing of building maps
  • Quick conversion of phase 1 maps to phase 2 maps
  • Simultaneous connection of architectural maps with structural maps And facilities and simultaneous application of changes between these plans
  • elimination of errors in the adaptation of facades and plans and sections
  • the possibility of conducting climate studies (light and shadow) on the building
  • the possibility of defining construction standards in building equipment
  • calculating the meter and its rapid change in case of change Maps
  • Ability to communicate with AutoCAD software, 3D ax (input and output)
  • the possibility of volumetric design and its conversion into executive plans

System Requirements

Operating System:

  • Microsoft® Windows® 10 64-bit , Enterprise and Professional
  • Microsoft® Windows® 7 SP1 64-bit , Enterprise, Ultimate, and Professional is supported but not recommended .

CPU Type:

  • Single- or Multi-Core Intel®, Xeon®, or i-Series processor or AMD® equivalent to SSE2 technology. Highest affordable CPU speed rating recommended.
  • Autodesk® Revit® software products will use multiple cores for many tasks.


  • 8 GB RAM
  • Usually sufficient for a typical editing session for a single model up to approximately 100 MB on disk. This estimate is based on internal testing and customer reports. Individual models will vary in their use of computer resources and performance characteristics.
  • Models created in previous versions of Revit software products may require more available memory for the one-time upgrade process.

Video Display Resolutions:

  • Minimum: 1280 x 1024 with true color
  • Maximum: Ultra-High (4k) Definition Monitor

Video Adapter:

  • Basic Graphics: Display adapter capable of 24-bit color
  • Advanced Graphics: DirectX® 11 capable graphics card with Shader Model 3

Disk Space:

  • 30 GB free disk space


Autodesk Revit 2021 Download

File ParametersParameter Values
File nameRevit_2021_G1_Win_64bit_dlm_001_006.sfx.exe
File Size1.96GB
File FormatEXE Installer
DownloadOfficial download link
Download ToolsNo special designation
Download link Revit_2021_G1_Win_64bit_dlm_001_006.sfx.exe

Autodesk Licensing Service 9 Download

File ParametersParameter Values
File Size53.2MB
File FormatZIP Archive
Download ToolsNo special designation
Download link

Autodesk XForce 2020 Download

File ParametersParameter Values
File Size579KB
File FormatZip Archive
Download ToolsNo special designation
Download link

Installation Guide

  1. Place the downloaded 6 files in the same directory.
    Then start the Revit_2021_G1_Win_64bit_dlm_001_006.sfx.exe file to complete the software installation

  2. Autodesk 2021 uses a new Autodesk license for activation. Here we need to first uninstall the new licensed program and install the old version of the licensed program for activation.

    • Uninstall:
      • Method I:
        • Open Run, enter the following command and press Enter
          %COMMONPROGRAMFILES(x86)%\Autodesk Shared\AdskLicensing\uninstall.exe
      • Method II:
        • Go to the directory C:\Program Files (x86)\Common Files\Autodesk Shared\AdskLicensing and run the uninstall.exe file.
    • Install:
      • Run the AdskLicensing-installer.exe file to install Autodesk Licensing Service 9
  3. Start Revit 2021, Select Enter Serial Number.

  4. Select an input from the serial numbers 666-69696969, 667-98989898, 400-45454545, 066-66666666.

  5. Enter the Product key: 829M1

  6. Here you have 2 choices:

    • a) Disable the network card, unplug the network cable or block the firewall (this just disables online checking), it will tell you that you need to connect to the Internet, just click Close, then click Activate again.
    • b) Click Activate, it will perform an online check, just click Close and click Activate again.
  7. Select I have an activation code provided by Autodesk

  8. Run XFORCE Keygen as an administrator

  9. Click on the Patch button (the successful patched dialog will pop up)

  10. Copy the application number to the keygen Request field and press the Generate button.

  11. Now copy the Activation field activation code, go back to the Autodesk activation screen and paste it, then click "Next"

  12. At this point, your Revit 2021 product has been fully activated.

Get More Audodesk 2021 Product

If you want to get more Audodesk 2021 products, you can go to the Autodesk 2021 All Products Direct Download Links (All Languages) to get the product’s official download link.
Next, you can go to Autodesk 2021 Product Keys For All Autodesk Products, to get your product’s  key  for subsequent  activation 
0 0 vote
Article Rating
赞(0) 打赏
未经允许不得转载:iemblog » Autodesk Revit 2021 Official Download + Active / Activation
Notify of
Newest Most Voted
Inline Feedbacks
View all comments
Douglas (@guest_805)
29 days ago

friend, autodesk removed the files, could you put it on mediafire please?

Jeffri (@guest_945)
10 days ago

it says initializing when I run the Revit_2021_G1_Win_64bit_dlm_001_006.sfx.exe file but it won’t load all the time can anyone explain why?

Jeffri (@guest_947)
10 days ago
Reply to  小C

nevermind, it worked! it was not initializing, but once I click the minimize button it started initializing, THANKS!

Beegee221 (@guest_1006)
2 days ago

I am unable to get the to the point to insert the activation code. I choose close after checking the internet connection, and the same dialog pops up. I can never choose the offline method. What am I doing wrong?

BobbyGG (@guest_1012)
1 day ago

Hi. It says “Registration-Activation Error (0015.111)”

I am running xf-adesk20 as administrator.

I copy the request code, then copy the activation code. It still says error 🙁

BobbyGG (@guest_1014)
1 day ago
Reply to  BobbyGG

Suddenly worked after several times 🙂






Would love your thoughts, please comment.x